GP
S A
cc
es
so
rie
s
AirGizmos GPS Panel Docks & Antenna Docks ............................ 220-222
Ameri-KING GPS Remote Switches/Relays ............................................ 217 GPS Switching & Annunciator Panels ................................. 218
Cobham GPS Remote Switches/Relays ............................................ 217
Deklin Technologies Annunciators ........................................................................211 WAAS Upgrade Adapter ...................................................... 220
Eaton Switches, Pushbutton - Lighted .................................... 215-216 Switch Bulbs ........................................................................ 216
GPS Networking GPS Splitters ................................................................ 219-220
Icarus Altitude Encoders/Serializers .............................................. 216
Jeppesen Skybound Adapter ............................................................... 220
Mid-Continent Course Deviation Indicators ................................................ 206 Annunciators & Annunciator Control Units ................... 207-209 TAWS Control Units ..................................................... 210-211
Shadin Altitude Encoders/Serializers .............................................. 216
Staco Switch Switches, Pushbutton - Lighted .................................... 211-214 Switch Bulbs ........................................................................ 216
TED GPS Notch Filters ............................................................... 220
Trans-Cal Industries Interface Adapters/Serializers ............................................. 217
GPS ACCESSORIES
3
205Order Toll Free1-800-235-3300
Fax: 1-800-828-0623
http://www.edmo.com
Approach-Certified Course Deviation Indicators
MID-CONTINENT Course Deviation Indicators (TSO C60a)Manufacturer: Receiver: CDI: Features:AlliedSignal KLN-88 MD40-16 T/F MSG WRN APR WPT KLN-89,90A MD40-32 T/F MSG WPT KLN-89B,90B MD40-232 T/F MSG WPT W/Resolver KLX-135 MD40-42 T/F MSG WPT
MD40-42
MD40-64
MD40-66
MD40-65
MD40-09
MD40-232
ARNAV AVA-1000 MD40-04 T/F HI-SENS PTK WPT R-40,R-60 MD40-04 T/F HI-SENS PTK WPT FMS-5000,R-5000, R-50i MD40-21 T/F VFR APR ALERT STAR 5000 GPS MD40-27 T/F VFR APR ALERT
FOSTER LRN-500 (orig.) MD40-04 T/F HI-SENS WPT PTK
GARMIN GPS-100AVD MD40-22 T/F MSG GPS-150 MD40-39 T/F MSG WRN ARV GPS-155/165 MD40-242 T/F MSG WPT w/resolver GNC-300 MD40-242 T/F MSG WPT w/resolver GNC-250 MD40-42 T/F MSG WPT
MAGELLAN SKYNAV 5000 MD40-31 T/F MSG WPT
NORTHSTAR M2(GPS),600 MD40-29 T/F ALERT WRN VFR PTK M3 MD40-41 T/F ALERT WRN VFR PTK RAIM 60 MD40-43 OFF PTK WRN WPT M3 APR MD40-64 T/F APR PTK WPT MSG
II MORROW Apollo 602,611,612,612B MD40-02 T/F WRN ARV 800 FLYBUDDY MD40-02 T/F WRN ARV NMS-2001 MD40-23AL (available thru II Morrow only) APOLLO 360 MD40-44 T/F MSG PTK 2001/GPS, TSO, APR MD40-65 T/F MSG PTK APR ACTV OBS HLD
TERRA TPGS 400D MD40-38 T/F WRN ADV
TRIMBLE TNL 1000,1000DC MD40-38 T/F WRN ADV TNL 2000,2000A,2100 MD40-61 T/F PTK WRN APR WPT TNL2100T I/O,2000T,2100T MD40-62 T/F ADV WRN APR WPT TNL 2800 (system) TNL 3000T,3100T MD40-62 T/F ADV WRN APR WPT TNL 2000APR,2101,2101 I/O MD40-66 T/F MSG WPT HLD APR
MISC. VARIOUS MD40-09 BASIC CDI
Approach certification depends on certification status of each GPS receiver.Electrical and mechanical Specifications: Size/Weight: standard 2 1/4” / 0.5 lbs.Case Material: Glass-filled, Flame-Retardant Polycarbonate. Left-Right Meter: DCResistance: 1000 ohms + 50 ohms. Current Rating: Zero Center, 150µa,+10µa, fullscale each side of center. TO-OFF-FROM Meter: DC Resistance: 200 ohms +50 ohms. Current Rating: OFF @ Center +200 + 25µa for TO, -200 + 25µa forFROM. Annunciator Lamps: Incandescent type; operation from either 14 VDC or28 VDC. Current Rating: 28 VDC single lamp each -37 ma; 14 VDC single lampeach -40 ma; 28 VDC double lamp (per pair) -72 ma; 14 VDC double lamp (per pair) -80 ma.
GARMIN AT Compatible 3-1/8” CDI
This CDI is the same unit that GARMIN AT™ puts in their systems. It is a direct pin-for-pin replacement for the Col-lins Microline™ IND-350 and 351. It is also a direct replacement for the KI-206 with a different connector.P/N: MD200-306
FEATURES:• FAA TSO Approved for use with all GPS and VOR systems• Fits standard 3-1/8” panel cutout • High quality rectilinear meter movements• Quality MIL-SPEC connector included • Annunciations for NAV, GPS and Back course (BC)• Automatic photocell annunciator dimming• TSO C34e, C36e, C40c approved• True course resolver output• Internal 14 and 28 volt lighting• Optional course datum synchro
GPS ACCESSORIES
3
Order Toll Free1-800-235-3300Fax: 1-800-828-0623
http://www.edmo.com206
MD 41 ACU TSO’dAnnunciator Control Unit for Approach
Certified GPS Receivers
It was merely a matter of time. Rapidly advanc-ing technology has enabled IFR aircraft to navigate both-enroute and on approach with a single source of navigation: GPS.
But along with the enhanced capabilities in the co*ckpit comes increasing complexity in and behind the instrument panel. The need for a myriad of switches, relays and annunciators in approach-certified GPS-equipped aircraft makes for complex and relatively expensive installations. But no longer. The Mid-Continent Instrument’s MD 41 ACU, the fully integrated, compact GPS annunciator control unit. The perfect solution.
The MD 41 combines navigation source switch-ing to the primary CDI or HSI with key GPS se-lection functions in a standard ATI panel-mount unit only 4.625 inches deep. Up to 7 separate relays and 3 switches are replaced by this single, compact unit, making installation simpler, faster and more economical. Lighted push but-tons and easy-to-read annunciators make the MD 41 popular with pilots as well as technicians. Push buttons provide plenty of tactile feedback, ensuring safe, accurate operation, even in bumpy IFR conditions. And Pilots can fly with confidence, knowing that the MD 41 has been certified to TSO C129 standards, meeting the new FAA field approval requirements.
MD 41 Highlights• TSO C129 approved to newest FAA stan-dards • Horizontal or vertical configuration • Proven daylight readability • Annunciator dim/brighten automatically • Push-button brightness controlled by instrument lighting rheostat • Con-nector/installation kit included • 19 pole relays, gold-plated contacts • ILS frequency override selectable • Built-in annunciation self-test • MD 41 ACU Controls • NAV/GPS Alternate action switch. Selects either NAV or GPS naviga-tional information on HSI or CDI • GPS/APR. Momentary switch. Arms GPS Approach Mode • OBS/LEG. Alternate action switch. Selects either OBS or LEG Mode • Lamp Test. Momen-tary switch. Tests annunciator lamps
The MD 41 ACU’s ATI-style footprint and 4.625-inch depth offer greater flexibility in approach-certified GPS installations. It can be a direct replacement for many DME indicators.
Environmental Characteristics:TSO Approval: TSO C129Applicable Documents: RTCA DO-160C, DO-208Operation Temperature Range: -20ºC to +70ºCHumidity: 95%
Altitude Range: 0 to 35,000 ft.Vibration: Cat.M and NOperational Shock: Rigid Mounting, 6 G operational 15 G Crash SafetyDesign: All solid-statePower Requirements: MD 41-( ) 14VDC: 0.65 Amps MD 41- ( ) 28 VDC: 0.40 AmpsRelay Contact Current Rating: 2 Amp DCAvailable Relay Poles (SPDT): 19 Poles
Physical Characteristics:Mounting: Panel-mount ATI Depth: 4.625 in.Width: 3.5 in. Weight: 0.75 lbs.Height: 1.350 in.
P/N: Description:MD41-1484W ACU/Horiz/14V/GNS-43MD41-1488W ACU/Horiz/28V/GNS-43MD41-1494W ACU/Vertical/14V/GNSMD41-1498W ACU/Vertical/28V/GNS
MD 41 AnnunciatorControl Unit
Specifications
Vertical Mount for FlexibilityThe MD 41 ACU is available in a convenient vertical mount for added installation flexibility. Also shown above are MD 41 versions for GPS systems not requiring the OBS/LEG or GPS/APR selector buttons.
Acronym Key:ACTV ActiveACU Annunciator Control UnitARM Arm (to make ready)
ATI Air Transport IndicatorCDI Course Deviation IndicatorDME Distance Measuring EquipmentFAA Federal Aviation AdministrationGPS Global Positioning SystemHSI Horizontal Situation IndicatorILS Instrument Landing SystemLEG Leg (part or section of a route)LOC LocalizerMSG MessageOBS Omni Bearing SelectorRTCA Radio Technical Commission for AeronauticsSPDT Single Pole Double ThrowTSO Technical Standard OrderVDC Volts Direct CurrentWPT Waypoint (position or NAV fix in route)VOR VHF Omnidirectional Range
GPS Slim-Line ProAnnunciatorControl Unit
MD41-1000 Series
• TSO C129 Approved system (DO-160C Env. Cat. F2-up to 55,000 Feet)• Ultra-Compact design available in vertical or horizontal configuration• 24-Pole remote relay unit with multiple mounting options• Relays energized individually or simultaneously for flexible installation• Aircraft Quality MIL-SPEC connectors and installation kit included• Internally lighted push buttons• Automatic photocell dimming for annunciators• Proven daylight readability• ILS frequency override selectable• Rugged construction insures trouble free operation• Available for all approach certified GPS systems• Field proven installations, from single-engine to Boeing 737’s• Professional technical support
P/N: Description:MD41-248 24 Pole Remote Relay/28 VoltMD41-24P28 24 Pole Remote Relay/28V, 28 Volt Only PMA’DMD41-1304 Horiz/14V, RDR/TERR SwitchMD41-1308 Horiz/28V, RDR/TERR Switch/PMAMD41-1310 Vert/28, Honeywell Mark VIIMD41-13105 Vert/5V, Honeywell Mark VIIMD41-1311 Horiz/28, Honeywell Mark VIIMD41-13115 Horiz/5VMD41-1314 Vert/14V, RDR/TERR SwitchMD41-1318 Vert/28V, RDR/TERR SwitchMD41-1324 Horiz/14V/TSO, 24 POLEMD41-1324C Control Head Only/14V, Slim Line Pro SeriesMD41-1328 KLN90B S/L ACU/Horiz/28V TSO, 24 POLEMD41-13285 KLN90B S/L ACU/Horiz/5V/TSOMD41-1328C Control Head Only/28V, Slim Line Pro SeriesMD41-1334 KLN90B S/L ACU/VERT/14V TSO, 24 POLEMD41-1334C Control Head Only/14V, Slim Line Pro SeriesMD41-1338 KLN90B S/L ACU/Vert/28V TSO, 24 POLEMD41-13385 KLN90B S/L ACU/Vert/5V TSO, 24 POLEMD41-1338C Control Head Only/28V, Slim Line Pro SeriesMD41-1348 TAWS for MARK XXIIMD41-1368 TAWS ACU/Honeywell MK21/28VMD41-13685 TAWS ACU/Honeywell MK21/5VMD41-1404A GPS400/420/430 S/L ACU Horiz/14VMD41-1404C Control Head Only/28V/Horiz, GPS400/GNC420/GPS430MD41-1408A GPS400/420/430 S/L ACU Horiz/28VMD41-1408C Control Head Only/28V, Slim Line Pro Series
GPS ACCESSORIES
3
207Order Toll Free1-800-235-3300
Fax: 1-800-828-0623
http://www.edmo.com
MD41-1414A GPS400/GNC420 S/L ACU Vert/14VMD41-1418A GPS400/GNC420 S/L ACU Vert/28VMD41-1424 GPS 155/165 S/L ACU Horiz/14 TSOMD41-1424C Control Head Only/14V, Slim Line Pro SeriesMD41-1428 GPS 155/165 S/L ACU/Horiz/28 TSO, 24 POLEMD41-14285 GPS 155/165 S/L ACU/Horiz/5V TSO, 24 POLEMD41-1428C Control Head Only/28V, Slim Line Pro SeriesMD41-1434 GPS 155/165 S/L ACU/Vert/14 TSO, 24 POLEMD41-1434C Control Head Only/14V, Slim Line Pro SeriesMD41-1438 GPS 155/165 S/L ACU/Vert/28 TSO, 24 POLEMD41-14385 GPS 155/165 S/L ACU/Vert/5V TSO, 24 POLEMD41-1444 Horiz/14V/TSO, GNC300, 300XL/155XL/165XLMD41-1444C Control Head Only/14V, Slim Line Pro SeriesMD41-1448 Horiz/28V/TSO, GNC300, 300XL/155XL/165XLMD41-14485 Horiz/5V/TSO, GNC300, 300XL/155XL/165XLMD41-1448C Control Head Only/28V, Slim Line Pro SeriesMD41-1454 Vert/14V/TSO, GNC300, 300XL/155XL/165XLMD41-1454C Control Head Only/14V, Slim Line Pro SeriesMD41-14585 Vert/5V/TSO, GNC300, 300XL, 155XL/165XLMD41-1464A Horiz/14V/TSO/GARM 530, GARMIN 530/GNS-530MD41-14685 Horiz/5V/TSO, FOR GNS-430MD41-1468A Horiz/28V/TSO/GARM 530, GARMIN 530/GNS-530MD41-1470 OBS Switch Only for GARMIN GNS 430/530MD41-1474A Vert/14V/TSO for GARMIN GNS-430MD41-1478A Vert/28V/TSO for GARMIN GNS-430MD41-1484W Horiz/14V/GNS-430W/530W WAAS AnnunciatorMD41-1488W 28V/GNS-430W/530W WAAS AnnunciatorMD41-1494W Vert/14V/GNS-430W, 530W WAAS AnnunciatorMD41-1498W Vert/28V/GNS-430W, 530W WAAS Annunciator
MD41-1300, 1400 Series
MD41-1500, 1600 Series
1/2 ATI HOLE PUNCHGreat for cutting holes for the Mid-Continent MD-41 GPS Interface, the Shadin MiniFlo Fuel Indicator and a host of other prod-ucts that use a 3.195 x 1.22 inch cut out. P/N: MD155
File Templates ForMD41 GPS (ACU’s)
Available in three sizes:P/N: Description:MD-100 For standard 3.2 x 1.2 inch ACUMD-1000S For 2.25 x 0.8 inch “Slim Line”MD-1000L For 2.73 x 0.8 inch “Slim Line”
• Rugged .04 inch thick stainless steel plate• Use as template when cutting & filing mounting holes for MD41 ACU’s.
Annunciation Options for GARMIN
Garmin mandates installation of an alternate annunciator for any WAAS installation when internal annunciation is outside the “acceptable field-of-view”.
EDMO sells all three of the annunciation op-tions that Garmin offers, the MD41-1468A, the MD41-1408A and the MD41-1488W. Refer to the Garmin install manual for details.
MD41-1408A
MD41-1488W
MD41-1468A
P/N: DESCRIPTION:MD41-1488W WAAS ANNUNCIATOR, ACU/HORIZ/28V/GNS-430 W/530WMD41-1468A S/L ACU/HORIZ/28V/TSO/ GARM 530MD41-1408A GPS400/420/430 S/L ACU HOR/28V
GPS ACCESSORIES
3
Order Toll Free1-800-235-3300Fax: 1-800-828-0623
http://www.edmo.com208
Manufacturer Allied SignalDescription: ACU:KLN-89B- HOR, 14V (HEAD ONLY) MD41-1524CKLN-89B- HOR, 14V (WITH REMOTE RELAY) MD41-1524KLN-89B- HOR, 28V (HEAD ONLY) MD41-1528CKLN-89B- HOR, 28V (WITH INTERNAL RELAYS) MD41-528KLN-89B- HOR, 28V (WITH REMOTE RELAY) MD41-1528KLN-89B- VERT, 14V (HEAD ONLY) MD41-1534CKLN-89B- VERT, 14V (WITH INTERNAL RELAYS) MD41-534KLN-89B- VERT, 14V (WITH REMOTE RELAY) MD41-1534KLN-89B- VERT, 28V (HEAD ONLY) MD41-1538CKLN-89B- VERT, 28V (WITH INTERNAL RELAYS) MD41-538KLN-89B- VERT, 28V (WITH REMOTE RELAY) MD41-1538KLN-900- HOR, 28V (HEAD ONLY) MD41-1928CKLN-900- HOR, 28V (WITH INTERNAL RELAYS) MD41-928KLN-900- HOR, 28V (WITH REMOTE RELAY) MD41-1928KLN-900- VERT, 28V (HEAD ONLY) MD41-1938CKLN-900- VERT, 28V (WITH INTERNAL RELAYS) MD41-938KLN-900- VERT, 28V (WITH REMOTE RELAY) MD41-1938KLN-90B- HOR, 14V (WITH INTERNAL RELAYS) MD41-324KLN-90B- HOR, 14V (WITH REMOTE RELAY) MD41-1324KLN-90B- HOR, 28V (HEAD ONLY) MD41-1328CKLN-90B- HOR, 28V (WITH INTERNAL RELAYS) MD41-328KLN-90B- HOR, 28V (WITH REMOTE RELAY) MD41-1328KLN-90B- VERT, 14V (HEAD ONLY) MD41-1334CKLN-90B- VERT, 14V (WITH INTERNAL RELAYS) MD41-334KLN-90B- VERT, 14V (WITH REMOTE RELAY) MD41-1334KLN-90B- VERT, 28V (HEAD ONLY) MD41-1338CKLN-90B- VERT, 28V (WITH INTERNAL RELAYS) MD41-338KLN-90B- VERT, 28V (WITH REMOTE RELAY) MD41-1338KLN-90B-, HOR, 14V (HEAD ONLY) MD41-1324CALWAYS SPECIFY VOLTAGE (5 Volt Available)
Manufacturer GarminDescription: ACU:GNS-430- HOR, 14V (HEAD ONLY) MD41-1464CGNS-430- HOR, 28V (HEAD ONLY) MD41-1468CGNS-430- VERT, 14V (HEAD ONLY) MD41-1474CGNS-430- VERT, 28V (HEAD ONLY) MD41-1478CGPS155/165- HOR, 14V (HEAD ONLY) MD41-1424CGPS155/165- HOR, 14V (WITH REMOTE RELAY) MD41-1424GPS155/165- HOR, 28V (HEAD ONLY) MD41-1428CGPS155/165- HOR, 28V (WITH REMOTE RELAY) MD41-1428GPS155/165- VERT, 14V (HEAD ONLY) MD41-1434CGPS155/165- VERT, 14V (WITH REMOTE RELAY) MD41-1434GPS155/165- VERT, 28V (HEAD ONLY) MD41-1438CGPS155/165- VERT, 28V (WITH REMOTE RELAY) MD41-1438GPS155XL/GNC300(XL)- HOR, 14V (HEAD ONLY) MD41-1444CGPS155XL/GNC300(XL)- HOR, 14V (WITH REMOTE RELAY) MD41-1444GPS155XL/GNC300(XL)- HOR, 28V (HEAD ONLY) MD41-1448CGPS155XL/GNC300(XL)- HOR, 28V (WITH REMOTE RELAY) MD41-1448GPS155XL/GNC300(XL)- VERT, 14V (HEAD ONLY) MD41-1454CGPS155XL/GNC300(XL)- VERT, 14V (WITH REMOTE RELAY) MD41-1454GPS-400, GNC-420, GNS-430- HOR, 14V (HEAD ONLY) MD41-1404CGPS-400, GNC-420, GNS-430- HOR, 14V(W/ REMOTE RELAY) MD41-1404AGPS-400, GNC-420, GNS-430- HOR, 28V (HEAD ONLY) MD41-1408CGPS-400, GNC-420, GNS-430- HOR, 28V(W/ REMOTE RELAY) MD41-1408AGPS-400, GNC-420, GNS-430- VERT, 14V (HEAD ONLY) MD41-1414CGPS-400, GNC-420, GNS-430- VERT, 14V(W/ REMOTE RELAY) MD41-1414AGPS-400, GNC-420, GNS-430- VERT, 28V (HEAD ONLY) MD41-1418CGPS-400, GNC-420, GNS-430- VERT, 28V (W/ REMOTE RELAY) MD41-1418AS/L ACU/HORIZ/14V/TSO GARMIN 530 MD41-1464AS/L ACU/HORIZ/28V/TSO/GARMIN 530 MD41-1468AS/L ACU/VERT/14V/TSO MD41-1474AS/L ACU/VERT/28V/TOS MD41-1478AALWAYS SPECIFY VOLTAGE (5 Volt available)
Manufacturer II Morrow/UPS Aviation TechnologiesDescription: ACU:GX50/60, 2001( )/2101- HOR, 14V (HEAD ONLY) MD41-1724CGX50/60, 2001( )/2101- HOR, 14V (WITH INTERNAL RELAYS) MD41-724GX50/60, 2001( )/2101- HOR, 14V (WITH REMOTE RELAY) MD41-1724GX50/60, 2001( )/2101- VERT, 14V (HEAD ONLY) MD41-1734CGX50/60, 2001( )/2101- VERT, 14V (WITH REMOTE RELAY) MD41-1734GX50/60, 2001( )/2101- VERT, 28V (WITH INTERNAL RELAYS) MD41-738GX50/60, 2001( )/2101- VERT, 28V (WITH REMOTE RELAY) MD41-1738GX50/60, 2001( )/2101-VERT, 14V (WITH INTERNAL RELAYS) MD41-734GX50/60, 2001( )/2101-VERT, 28V (HEAD ONLY) MD41-1738C
Manufacturer NorthstarDescription: ACU:M-3APR- HOR, 14V (HEAD ONLY) MD41-1824CM-3APR- HOR, 14V (WITH INTERNAL RELAYS) MD41-824M-3APR- HOR, 14V (WITH REMOTE RELAY) MD41-1824M-3APR- HOR, 28V (HEAD ONLY) MD41-1828CM-3APR- HOR, 28V (WITH INTERNAL RELAYS) MD41-828M-3APR- HOR, 28V (WITH REMOTE RELAY) MD41-1828M-3APR- VERT, 14V (HEAD ONLY) MD41-1834CM-3APR- VERT, 14V (WITH INTERNAL RELAYS) MD41-834M-3APR- VERT, 14V (WITH REMOTE RELAY) MD41-1834M-3APR- VERT, 28V (HEAD ONLY) MD41-1838CM-3APR- VERT, 28V (REMOTE RELAY) MD41-1838M-3APR- VERT, 28V (WITH INTERNAL RELAYS) MD41-838ALWAYS SPECIFY VOLTAGE
Manufacturer TrimbleDescription: ACU:2000APR, 2101(ALL)- HOR, 14V (HEAD ONLY) MD41-1624C2000APR, 2101(ALL)- HOR, 14V (WITH INTERNAL RELAYS) MD41-6242000APR, 2101(ALL)- HOR, 14V (WITH REMOTE RELAY) MD41-16242000APR, 2101(ALL)- HOR, 28V (HEAD ONLY) MD41-6282000APR, 2101(ALL)- HOR, 28V (WITH REMOTE RELAY) MD41-16282000APR, 2101(ALL)- VERT, 14V (HEAD ONLY) MD41-1634C2000APR, 2101(ALL)- VERT, 14V (WITH INTERNAL RELAYS) MD41-6342000APR, 2101(ALL)- VERT, 14V (WITH REMOTE RELAY) MD41-16342000APR, 2101(ALL)- VERT, 28V (HEAD ONLY) MD41-1638C2000APR, 2101(ALL)- VERT, 28V (WITH INTERNAL RELAYS) MD41-6382000APR, 2101(ALL)- VERT, 28V (WITH REMOTE RELAY) MD41-1638TNL8100,HT9000- HOR, 28V (HEAD ONLY) MD41-1648CTNL8100,HT9000- HOR, 28V (WITH REMOTE RELAY) MD41-1648TNL8100,HT9000- VERT, 28V (HEAD ONLY) MD41-1658C
GPS Slim-Line Pro AnnunciatorControl Units
GPS ACCESSORIES
3
209Order Toll Free1-800-235-3300
Fax: 1-800-828-0623
http://www.edmo.com
MD41-24824-Pole Remote
Relay Unit
MD41-24P14VMD41-24P28V
24 Pole Remote Relay Unit
PMA’d
TAWS ControlUnits (TACU)
P/N: MD41-1208
P/N: MD41-1308
Mid-Continent Instruments’ MD41 Terrain Awareness Control Units (TACU). These units provide annunciation and mode selection for both TAWS (Terrain Awareness Warning Sys-tem) and EGPWS (Enhanced Ground Proximity Warning System). The fully integrated, compact control units do away with the need for a myriad of switches, relays and annunciators making installation fast and easy. Both the MD41-1308 and the more compact MD41-1208 present pri-mary or secondary visual alert of TAWS/EGPWS within the pilot’s direct field-of-view. Engineered with a single cutout, easy-to-wire D-subminia-ture connector, and internal dimming circuitry, the TACU reduces typical installation costs.
P/N: Description:MD41-1208 Works with the HONEYWELL KGP-560. It has 2 BUTTONS and shows no “TAWS” display on the radar, HORIZ/28VMD41-1208 HORIZ/28V MD41-1204 HORIZ/14V MD41-12085 HORIZ/5V MD41-1214 VERT/14V MD41-1218 VERT/28V MD41-12185 VERT/5VMD41-1308 EGPWS, 28V
Compact Self-ContainedAnnunciation &
Control UnitThe MD41-1024, -1034, -1028, -1038 is a com-pact, self -contained Annunciation andControl unit. The fully integrated, control unit provides annunciation and mode selectionfor TAWS (Terrain Awareness Warning System). It combines all the necessary functionsrequired to interface a wide range of TAWS systems for FAA approval.Other features include dual 20,000 hour lamps used for all annunciations, internallylighted selection switches and choice of manual or automatic photocell dimming. Anexternal annunciation dimming adjustment is provided for balancing low level lightconditions.
P/N: Description:MD41-1024 HORIZ/14VMD41-1028 HORIZ/28VMD41-1034 VERT/14VMD41-1038 VERT/28V
GPS ACCESSORIES
3
Order Toll Free1-800-235-3300Fax: 1-800-828-0623
http://www.edmo.com210
TAWS/ACU/HORIZONTAL/5V
The MD41-1244, -1254, -1248, -1258 is a com-pact, self -contained Annunciation and Control unit. The fully integrated, control unit provides annunciation and mode selection for the Sandel ST3400 TAWS (Terrain Awareness Warning System). Other features include dual 20,000 hour lamps used for all annunciations, internally lighted selection switches and choice of manual or automatic photocell dimming. An external annunciation dimming adjustment is provided for balancing low level light conditions.P/N: MD41-12485
TAWS/EGPWS CONTROL UNIT/VER/5VP/N: MD41-13105
TAWS ACU/HONEYWELL MK21/5VMD41-1300 Series Terrain AwarenessAnnunciation Control Unit for the Honeywell Mark XXI EGPWS SystemP/N: MD41-13685
TAWS ACU/HONEYWELL MK21/5VMD41-1300 Series Terrain AwarenessAnnunciation Control Unit for the Honeywell Mark XXI EGPWS SystemP/N: MD41-13685
GPS ANNUNCIATORGPS Annunciator.• Smallest - Lightest - Easiest• 2.50”w X 0.63”h X 0.20” Thick• Only 3 Holes to Drill• Reduced Installation Time• DO160E TestedP/N: DWA1000
STACO High Bright White LED/Voltage-Dimmed LED
OVERVIEW:The StacoSwitch Series 90 is a broad product line of rugged duty lighted pushbutton switches and indicators...and they have expanded it further. The popular Series 90 incandescent and LED lighted displays are now available with the new High Brightness White LED circuit and voltage-dimming capabilities.
MARKETS:The Series 90 is built to rugged Military Specifica-tions and is used throughout the world in applica-tions where extreme environments demand the ultimate in switch performance. It has found use in all branches of the military, commercial aircraft and avionics, and industrial markets.
APPLICATIONS:StacoSwitch offers numerous lighted display styles, including Sunlight Readable and Night Vision Compatible in both incandescent and LED versions. Staco’s newest voltage-dimmed High Bright White LED version can be used along with existing incandescent without changing your dim-ming circuit. The transistorized voltage-dimming circuit is packaged as Chip Scale Package (CSP) device and incorporated in the High Brightness White LED light source assembly. Voltage dimming operates from 28 V down to 8.4 V.
What ever your lighted switch/indicator needs may be, StacoSwitch has a solution.
RETROFIT OPTION:For those current users of Series 90 incandescent lighted pushbuttons, StacoSwitch offers a replacement LED light source assembly. The voltage-dimmed LED assembly is a drop-in replace-ment for incandescent pushbuttons in the Series 90 switch body, allowing users to eliminate costly replacement of incandescent lamps with long life LEDs. LED life is rated up to 100,000 hours or longer.
Users simply remove the incandescent lamps, slide off the base, and replace it with the new LED light source assembly. This is available in both High Bright LED and voltage-dimmed High Bright LED.
FEATURES GENERAL:• Color is pure white, not the “yellowish” white of incandescent bulbs.• Brightness is approximately equal in brightness to incandescent lighting.• Maximum current for a pushbutton is 90-180 mA @ 5 V and 40-80 mA @ 28 V (depending on configuration) for maximum brightness and long life.• White LED lighting is compatible with SLR and NVIS requirements, as well as most standard color options and display styles. Note: Dimming curve of standard LED will be different than an incandescent voltage-dimming curve.
VOLTAGE-DIMMABLE WHITE LED OPTION:• Voltage-dimming curve simulates 28 V incandescent lighting curves.• Operating voltage range for the 28V voltage dimmable unit is approx 8.4V to 28V.• Dimming curve simulates incandescent light output on the same circuit• Single IC chip dimer design allows for direct replacement of incandescent pushbuttons in Series 90 switches on a voltage-dimmed circuit with the voltage-dimmable white LED display.• Single IC chip dimmer with matched white LED circuit can be adapted to other applications utilizing 28V dimming circuits. Call EDMO Sales for application assistance. 1-800-235-3300
White LED Power RequirementsCurrent (mA) Full or 3-Way 4-Way 2-Way Split Split Split5 volt 90 135 18028 volt 40 60 8028 volt 80 80 80dimmable
• Drop-in replacement for current incandescent pushbuttons• Bright white lighting uses less power• Removable LED base is easily replaced• Voltage-dimmed version can be mixed with in candescent lighting on the same voltage-dimmed bus• Efficient manufacturing design makes LED lighting affordable
GPS ACCESSORIES
3
211Order Toll Free1-800-235-3300
Fax: 1-800-828-0623
http://www.edmo.com
Staco IncandescentSeries AV17
Appearance: Sunlight readable “deadfront” legends provide a sleek modern look to enhance your avionics application.
Firm positive switch action provides a lifetime tactile feel that instills user confidence. Able to meet stringent military specifications, The AV17 Series will stand up to the most demand-ing avionics requirements. The AV17 series is specifically designed for those critical applica-tions where reduced size and weight is a prime requisite. With 230 standard legends, 6 lighting colors, 4 separate light circuits and 2 form “C” switching circuits...You get 1 very versatile switch product to control even your most com-plex avionics.
Display Pushbuttons:• “Deadfront” Legends • LED or Incandescent• LED life of 100,000+ hours • Sunlight Read-able • Low Power Consumption • Sealed Units • Low Heat Rise LED lighting • Standard EFIS legends & lighting
Switches: • DPDT Circuitry • Silver or Gold con-tacts • Sealed units • Easy solder termination• Crimp pin termination • Momentary or alternate action or indicator only
Slot Mounting: For horizontal or vertical slot mounting of two or more individual mount switch/indicators, L = length of horizontal mount-ing slot (or height of vertical) and N = number of units in a row. L = .752” x (N-1) + .690”. The width of the slot should be .690”. A minimum of .140” spacing between rows is recommended.
Input Voltage (Volts)0.00 4.00 8.00 12.00 16.00 20.00 24.00 26.00
0.00
0.25
0.50
0.75
1.00
1.25
1.50
Low Limit
NominalCSPDevice
High Limit
High Brightness LED Voltage Dimming Curvewith CSP Device
Nor
mal
ized
Lum
inan
ce
SPECIFICATIONS:Part Number Ordering LED Light Source, Ground Circuit Options & EMI/RFI Status
The Table below is part of StacoSwitch’s Series 90 Part Conflagration, Table 4 Addendum. Please refer to the Series 90 Catalog for additional switch and pushbutton options.
CODE: LIGHT SOURCE: BUSSED GROUND EMI/RFI CURRENT SOURCING CONFIGURATION SHIELDED OR SINKING A High Brightness (HB) LED Single Common EMI/RFI Sourcing B High Brightness (HB) LED Single Common EMI/RFI Sinking C High Brightness (HB) LED Split Common EMI/RFI Sourcing D High Brightness (HB) LED Split Common EMI/RFI Sinking E HB LED with Voltage Dimming 1/ Single Common EMI/RFI Sourcing F HB LED with Voltage Dimming 1/ Single Common EMI/RFI Sinking G HB LED with Voltage Dimming 1/ Split Common EMI/RFI Sourcing H HB LED with Voltage Dimming 1/ Split Common EMI/RFI Sinking
SUMMARY:The white LED package provides an easy upgrade path for current users and an excellent option for new applications. Intelligent design makes the StacoSwitch white LED offerings reliable, afford-able, and adaptable to customer needs.
GPS ACCESSORIES
3
Order Toll Free1-800-235-3300Fax: 1-800-828-0623
http://www.edmo.com212
Staco Switch Push-Button Assembly Information
Legend Type “A”
Legend Type “B”
Stack these items tightly together, place inside of Faceplate Seal P/N: 17002, then slide them into the BezelP/N: 17001
Bezel then snaps onto the Lampbox Assembly
Note:P/N: 17003
Faceplate non-reflective surface must face up-ward.
BEZELP/N: 17001
FACEPLATE SEALP/N: 17002
FACEPLATETEXTUREDP/N: 17007
FACEPLATENON REFLECTIVE
P/N: 17003
CUSTOM LEGENDP/N: STC LEGEND
FILTER DIFFUSER2 EA, P/N: 17008
COLOR FILTERASSEMBLYGASKET 2
COLOR FILTERASSEMBLYGASKET 3
COLOR FILTERASSEMBLYGASKET 4
LAMPBOXASSEMBLY
P/N: 1766X-0000
WARN
ALERT
NAV 1
GPS
Staco Switch Push-Button Wiring Diagram
Wiring DiagramFull GroundPlate Index
Post (REF)
Lamp Position NumbersShown For Ref. Only
Lamp Position Numbers (REF)Common Lamp Ground
WITH THE
YOU CAN...
ALL FROM YOUR DESKTOP!
EDMOCOPILOT
EDMOCOPILOT
View Featured Closeouts
See the Deal of the Day
Check product pricing and availability
Learn more atWWW.EDMO.COM
GPS ACCESSORIES
3
213Order Toll Free1-800-235-3300
Fax: 1-800-828-0623
http://www.edmo.com
Switch FAX In Order Worksheet
Please make a copy of this page. Complete the worksheet and FAX it to EDMO.
EDMO FAX 800-828-0623
Date:
Company:
Your Name:
Phone: Fax:
1) Switch or Indicator Assembly Part Number:
2) If Ordering “Crimp” Style, Quantity of Sockets, (min. 25):
3) Lamp Part Number and Quantity:
4) Push-Button Assembly Display Style:
5) Legend Color or Colors:
6) Custom Legend:
1 2 3 4 5 6 7 8
0 = Clear White1 = Red2 = Green3 = Amber Yellow4 = Luner White5 = Lemon Yellow6 = Blue
Draw the display style you have selected and include the color number in eachsegment.
Draw the display style you have selected and include the text specifications in each segment.
Text Note:Full Screen, Maximum of (4) lines with (7) characters per line.Full Screen, Horizontal, Maximum of (2) lines with (7) characters per line.Full Screen, Vertical, Maximum of (2) columns with (7) characters per column.Half Screen, Maximum of (2) lines with (4) characters per line.
(Choose from one of the 8 styles below)
GPS ACCESSORIES
3
Order Toll Free1-800-235-3300Fax: 1-800-828-0623
http://www.edmo.com214
EATON Series582 Switch
Avionic Switch 582Designed for use in the crew stations of com-mercial and military aircraft, shipboard systems, off road vehicles and commercial applications requiring a high reliability switch with supe-rior lighting. The 582 is a Series 581 switch mechanism with upgraded lighting capabilities and more options. The Series 581 is qualified to MIL-S-22885/101.
The switch design has evolved from specific customer requirements. We asked the people wo manufacture avionics, vetronic and ship-board equipment what was needed in a two pole, lighted pushbutton switch. The answers that came back included reliability, light weight, short behind panel depth, sunlight readability, night vision imaging system compatibility, LED illumination, spray-tight sealing and plug-in mounting. The Series 582 provides these capa-bilities.
Since 1942, our lighted indicators and pushbut-ton switches have proven to be the best in the industry at metting customer requirements for quality, reliability, variety of options and techni-cal performance. Your program needs will be supported by a committed team of people at Eaton. Eaton wants to be your long-term partner in product innovation, just-in-time delivery, electronic data interchange, quality improvement and responsiveness to changing design needs. A tour of our factory will prove our commitment to continuous improvement, quality control and responsiveness.
Features:Switch Design. The Series 582 is a one or two pole, Form C switch available in momentary and indicating alternate configurations. It is also available in a simple indicator configuration. The Series 582 is supplied with gold-plated terminals and has a lamp capsule retention system that prevents the accidental interchange of capsules during relamping, maintaining the orientation of the capsule in relation to the switch body. Lamp Capsule Replaceability and Retention.
The lamp capsule retention system allows the removal and replacement of the lamp capsule, without requiring the replacement of the switch body, providing the lowest spares cost to the equipment operator. It also prevents the acci-dental interchange of capsules during relamp-ing, maintaining the orientation of the capsule in relation to the switch body. This prevents accidental mis-orientation of the lamp capsule with the switch body during lamp replacement. Dual Mounting Pawls.
In order to ensure switch mounting integrity, two mounting pawls are supplied in the 582 which ensure balanced engagement force with the panel. Two pawls provide balanced clamping forces with the panel for superior performance under shock and vibration, and offer added safety in the event of a pawl failure or damage.
Call EDMO for more information.
Stormscope®Skywatch™ Switch
When installing the Stormscope® Skywatch™ system, use this EATON 582 series switch with factory legend. PMA approved
P/N: 4822-1046
Mounting Can & Bulbs
Required
GPS Switch Kits
Electromech Lighted Push-Button SwitchThe 6542350 (alternate) & 6542150 (momen-tary) lighted pushbutton switches use four bulbs, providing a redundant safety feature for IFR installations. Legend colors are green & blue. Other colors are available.
Technical Specifications:Gold ContactsRating: 30 volts DC or 115 volts AC, 2amps resistive; 1 amp induc-tiveWeight: .8 oz.Actuations: 100,000Mounting Hole: .875 X .875 Square.
P/N: Description:6542350 Lighted Alternate pushbutton switch (Green/Blue)6542350CLR Lighted Alternate pushbutton switch /custom/black/type B6542150 Lighted Momentary pushbutton switch (Green/Blue)6542150CLR Lighted Momentary pushbutton switch /custom/black/type BML-0330 14 V bulbML-0327 28 V bulbML-0328 6 V bulb
Electromech Lighted IndicatorThe 6543210 lighted indicator uses four bulbs, providing a redundant safety feature. Custom legends and different color choices make these indicators useful in many diverse applications. Legend colors are red & amber. Other colors are available.
P/N: Description:6543210 Lighted indicator (Red/Amber)6543210CLR Lighted indicator /custom/black/ type BML-0330 14 V bulbML-0327 28 V bulbML-0328 6 V bulb
Technical Specifications:Rating: 30 Volts DC or 115 Volts AC, 2 Amps Resistive: 1 Amp InductiveWeight: 0.8 oz. (approx)Operating Pressure: 2 lbs + 1lbPlunger Travel: 3/16” (approx)Actuations: 100,000
Dead Front Type “B” Clear Front Type “A”
GPS ACCESSORIES
3
215Order Toll Free1-800-235-3300
Fax: 1-800-828-0623
http://www.edmo.com
DEADFRONT LENS CAP(L811-1SG)
CLEAR LENS CAP(L811-1C)
NOTE:CUSTOM LEGENDS AVAILABLE UPON
REQUEST AT NO CHARGE!
NOTE:POSITION OF BARIERS LONG END IS INSERTED FIRST,SHORT END COMES FLUSH WITH TOP OF LENS BASE
FILTER PLATE(L812-7X)
BARRIER(L816-5)
BARRIER(L812-5)
LENS BASE(L814-2A)
CUSTOM LEGENDS
NO CHARGE!Specify type “A” or “B” when ordering
Note: Full face switches available as custom request
BULBS4 EA
These are the standard legends shipped with each Electro-Mech switch (Shown actual size).Type “A” is clear with Black Text, Type “B” is black with Clear Text.
NAV 1
LORAN
NAV 2
LORAN
NAV
LORAN
VHF
LORAN
VOR
LORAN
GPS
LORAN
NAV 1
GPS
NAV 2
GPS
NAV
GPS
VHF
GPS
VOR ILS
GPS
WP ALRT
GPS WRN
VOR
GPS
LORAN
GPS
MSG
WARN
WPT
APPRCH
WARN
ADV
PT
WARN
WPT
WARN
MSG
GPS
MSG
LORAN HOLD
VOR ILS
LORAN
WP ALRT
LRN WRN
MSG
STACO / EATON Switch BulbsP/N: DescriptionOL1099 12V SUB-MINI/60 MILLI-AMP BULBOL3229 14V SUB-MINI/40 MILI AMP BULBOL3335 28V SUB-MINI/16 MILLI-AMP BULBOL6839 28V SUB-MINI/24 MILLI-AMP BULB
Switch MountsL&M switch mounts were designed to simplify the mounting of multiple Staco and Eaton switches and annunciators. Made from high grade aluminum, glass bead blasted and black anodized for a clean finish.
SM-2 SM-3
SM-4
P/N: Description:SM-2 Dual Switch MountSM-3 Triple Switch MountSM-4 Quadruple Switch Mount
AltitudeEncoders/Serializer
Model 8800
SHADIN Altitude Encoder/Converter Model 8800 Automatic Altitude Data for Loran & GPS Receivers. Provides Mode-C grey code data to transponder, can provide high resolution (10 ft) RS232 serial data to selected GPS systems so altitude data is automatically input. Provides high resolution altitude data for IVS calculations. Can substitute as the 4th NAV satellite when only 3 satellites are in view. Altitude range:-1000 to 35,000 ft. P/N: Description:8800M II Morrow8800T Trimble/GarminIK8800 Install Kit Altitude Encoder
Model 9200
Designed to be interfaced to the aircraft’s existing Mode-C encoder in ad-dition to tapping into the aircraft’s static system. This allows high resolution altitude RS232 data (1 ft increments) to be fed to the GPS / AMS2000 for auto-matic altitude updating. Ad-ditionally, the serializer data can substitute as the 4th NAV satellite for many of the cur-rent GPS systems. This is not an encoder! The Shadin serializer has many of the benefits of the Falcon Encoder at a greatly reduced price.
P/N: Description:9200M II Morrow9200T Trimble/Garmin
Model 3000
The Icarus Model 3000 Altitude Se-rializer enhances the useful-ness of most aircraft GPS receiver. By pro-viding the receiver with the aircraft’s Mode C altitude, two dimensional navigation is available 24 hrs a day anywhere in the world with only three satellites in view. The Model 3000 also assists the receiver in determining 2D position when a satellite is lost
GPS ACCESSORIES
3
Order Toll Free1-800-235-3300Fax: 1-800-828-0623
http://www.edmo.com216
due to antenna blanking in a turn. The Warning flag will virtually never appear when the model 3000 is used to supplement satellite reception. If the aircraft is climbing or descending, substan-tial position errors are caused if the number of satellites in view goes below four, and the last computed altitude is not updated. The Model 3000 eliminates the need to manually enter the aircraft’s altitude when only three satellites are in view.
Most GPS receivers have the ability to view your Mode C encoder’s output, This enables you to check on the encoder’s accuracy by temporarily setting your altimeter to 29.92 and comparing the altitude on your pressure altimeter with that displayed on the receiver. The Model 3000 Seri-alizer easily installs in any aircraft equipped with a Mode C encoder. It is equipped with two con-nectors to facilitate the connections to the exist-ing encoder’s output and transponder. Since it connects to your primary encoder, the Mode C altitude that you can view on the receiver is the same altitude that is being transmitted to ATC. Since the serializer connects electrically to your existing encoder, the static system is not disturbed, and no recalibration is required.P/N: 3000U
Model IA-RS232C-SInterface Adapter
(Serializer)
Designed to convert parallel 10-bit ICAO pressure alti-tude data to a fan-out of two RS-232 compliant outputs, the IA-RS232C-S is an all solid-state Interface Adapter (Serializer.) This device pro-vides a simple and robust means of converting parallel
data into serial data and retransmitting to mul-tiple aircraft systems in a compact package.P/N: IA-RS232CS
Model IA-RS232C-DDual Port Interface Adapter (Serializer)
Designed to convert paral-lel 10-bit ICAO pressure altitude data from TWO altitude reporting digitiz-ers to a fan-out of two RS-232 compliant out-puts, the IA-RS232C-D is an all solid-state Interface Adapter (Serializer). TheIA-RS232C-D will accept data from only one digitizer at a time. This device provides a simple and robust means of converting parallel data into serial data and retransmitting to mul-tiple aircraft systems in a compact package.P/N: IA-RS232CD
GPS Remote Switches& Annunciators
RS08, RS12 & RS24Remote Switches
COBHAM GPS transfer switches allow large numbers of data or audio lines to be transferred with a single ground logic level. 14/28V opera-tion is provided and additional functions are in-cluded to make aircraft installation simpler. The RS series of reote switches is recommended by many GPS manufacturers, and has been flight proven in over 8,500 installations in all classes of aircraft. The RS12 & RS24 have more poles of switching for GPS “Approach Approved” installations, and are configured for multiple independent switching operation.
P/N: Description:RS12-020 GPS/LORAN DATA SWITCH/20KRS12-030 RS12-020 W/VOLTAGE KEYINGRS12-350 GPS/LORAN DATA SWITCH/35KRS12-500 GPS/LORAN DATA SWITCH/50KRS12-IKC INSTALLATION KIT (CRIMP)RS12-IKS SOLDER KIT FOR RS12 SERIESRS24-020 GPS/LORAN DATA SWITCHRS24-350 GPS/LORAN DATA SWITCH/35KRS24-500 GPS/LORAN DATA SWITCH/50K
RS16 Modular Remote Switch
The RS16 pro-vides user definable remote switching func-
tions for more complex operations. It can work with both voltage or ground keying, and has an independent ILS reversion logic switch (for ground keying mode). Each four-pole switch has it’s own status annunciation for fault monitoring and airframe troubleshooting. Dry nitrogen filled, gold contact, sealed relays provide dry-circuit to 0.5A switching range. Suitable to 35,000’.P/N: RS16-001
ANNUNCIATORS &PUSH-BUTTON SWITCHES
LD08 AnnunciatorLamp Dimmer
For use with the RS08/RS12 remote switches. Provides lamp dimming and test functions.P/N: LD08-001
AK-950 Series Remote Relay Assembly
Ameri-King AK-950 SERIES REMOTE RELAY ASSEMBLYP/N: Pole: Voltage:9501R8-14 8 149501R8-28 8 289501R12-14 12 149501R12-28 12 289501R24-14 24 149501R24-28 24 289501R48-14 48 149501R48-28 48 28
GPS ACCESSORIES
3
217Order Toll Free1-800-235-3300
Fax: 1-800-828-0623
http://www.edmo.com
GPS/NAV Switching & Annunciator PanelsAmeri-King Part Numbers
AK-950 SERIES GPS/NAV SWITCHING & ANNUNCIATOR PANELSEDMO Ameri-KingP/N: P/N: For Use With: Mount: Voltage:950-K1-14H 950-90B-14-H King KLN-90B Horizontal 14950-K1-14V 950-90B-14-V King KLN-90B Vertical 14950-K1-28H 950-90B-28-H King KLN-90B Horizontal 28950-K1-28V 950-90B-28-V King KLN-90B Vertical 28
950-K2-14H 950-900-14-H King KLN-900 Horizontal 14950-K2-14V 950-900-14-V King KLN-900 Vertical 14950-K2-28H 950-900-28-H King KLN-900 Horizontal 28950-K2-28V 950-900-28-V King KLN-900 Vertical 28
950-K3-14H 950-89B-14-H King KLN-89B Horizontal 14950-K3-14V 950-89B-14-V King KLN-89B Vertical 14950-K3-28H 950-89B-28-H King KLN-89B Horizontal 28950-K3-28V 950-89B-28-V King KLN-89B Vertical 28
950-G1-14H 950-300-14-H Garmin GNC 300/300XL/155XL Horizontal 14950-G1-14V 950-300-14-V Garmin GNC 300/300XL/155XL Vertical 14950-G1-28H 950-300-28-H Garmin GNC 300/300XL/155XL Horizontal 28950-G1-28V 950-300-28-V Garmin GNC 300/300XL/155XL Vertical 28
950-G6-14H 950-G6-14H Garmin GNC 400 Horizontal 14950-G6-14V 950-G6-14V Garmin GNC 400 Vertical 14950-G6-28H 950-G6-28H Garmin GNC 400 Horizontal 28950-G6-28V 950-G6-28V Garmin GNC 400 Vertical 28
950-G2-14H 950-165-14-H Garmin GNC 165/155 Horizontal 14950-G2-14V 950-165-14-V Garmin GNC 165/155 Vertical 14950-G2-28H 950-165-28-H Garmin GNC 165/155 Horizontal 28950-G2-28V 950-165-28-V Garmin GNC 165/155 Vertical 28
950-G3-14H 950-250-14-H Garmin GNC 250 Horizontal 14950-G3-14V 950-250-14-V Garmin GNC 250 Vertical 14950-G3-28V 950-250-28-V Garmin GNC 250 Vertical 28
950-T1-14H 950-2000-14-H Trimble TNL 2000A/T Horizontal 14950-T1-14V 950-2000-14-V Trimble TNL 2000A/T Vertical 14950-T1-28H 950-2000-28-H Trimble TNL 2000A/T Horizontal 28950-T1-28V 950-2000-28-V Trimble TNL 2000A/T Vertical 28
950-T2-14H 950-2101I/O-14-H Trimble TNL 2101I/O Horizontal 14950-T2-14V 950-2101I/O-14-V Trimble TNL 2101I/O Vertical 14950-T2-28H 950-2101I/O-28-H Trimble TNL 2101I/O Horizontal 28950-T2-28V 950-2101I/O-28-V Trimble TNL 2101I/O Vertical 28
950-T3-14H 950-8100-14-H Trimble TNL 8100/HT-9000 Horizontal 14950-T3-14V 950-8100-14-V Trimble TNL 8100/HT-9000 Vertical 14950-T3-28H 950-8100-28-H Trimble TNL 8100/HT-9000 Horizontal 28950-T3-28V 950-8100-28-V Trimble TNL 8100/HT-9000 Vertical 28950-M1-14H 950-GX50/60-14-H II Morrow GX-55/60 Horizontal 14950-M1-14V 950-GX50/60-14-V II Morrow GX-55/60 Vertical 14950-M1-28H 950-GX50/60-28-H II Morrow GX-55/60 Horizontal 28950-M1-28V 950-GX50/60-28-V II Morrow GX-55/60 Vertical 28
950-M2-14H 950-SL50/60-14-H II Morrow SL-55/60 Horizontal 14950-M2-14V 950-SL50/60-14-V II Morrow SL-55/60 Vertical 14950-M2-28H 950-SL50/60-28-H II Morrow SL-55/60 Horizontal 28950-M2-28V 950-SL50/60-128-V II Morrow SL-55/60 Vertical 28
950-GX-14H 950-GX55-14-H II Morrow GX-55 Horizontal 14950-GX-14V 950-GX55-14-V II Morrow GX-55 Vertical 14950-GX-28H 950-GX55-28-H II Morrow GX-55 Horizontal 28950-GX-28V 950-GX55-28-V II Morrow GX-55 Vertical 28
950-M3-14H 950-M3-14-H North Star M3 Approach/Enroute Horizontal 14950-M3-14V 950-M3-14-V North Star M3 Approach/Enroute Vertical 14950-M3-28H 950-M3-28-H North Star M3 Approach/Enroute Horizontal 28950-M3-28V 950-M3-28-V North Star M3 Approach/Enroute Vertical 28
950-U1-14H 950-UNS1-14-H Universal Avionics UNS-1 Horizontal 14950-U1-14V 950-UNS1-14-V Universal Avionics UNS-1 Vertical 14950-U1-28H 950-UNS1-28-H Universal Avionics UNS-1 Horizontal 28950-U1-28V 950-UNS1-28-V Universal Avionics UNS-1 Vertical 28
GPS/NAV SWITCHING &ANNUNCIATOR PANEL
MICRO SIZE, 24 Poles relays built-in FAA TSO-C129a and STC approved. Specify 28 Vdc or 14 Vdc. Applicable to all GPS available in the Market.
FEATURES:• World’s Smallest Annunciator Panel with 24 Relays built-in.• Minimum Panel Space required (2.12” W x 1.00” H x 2.63”D) only.• ILS Annunciator with or without Auto Override. (Meets Canadian Regulation.)• Silver Ring Front Bezel Panel to match with other Avionics Silver Crown Radios.• Illuminated Pushed Buttons Switches with Soft Activated Force for easy Operation during Air Turbulence.• Automatic Dimming with Photocell Detector and Lamp Test.• Sun Light Readable with Extra Large Lettering for easy Reading.• Single Connector for simplified Installation.• Front or Rear Horizontal/Vertical mounting.• Optional Pre fabricated Mil SPEC Wiring harness assemblies.• Micro Size, Light weight (0.35 Lbs.)
ACCESSORIES:• Machined Crimped type connector Kit.
WARRANTY:• Two (2) Years. Optional Extended Four (4) years Warranty.
AK-950 VerticalSwitching & Annunciator Panel
AK-950 HorizontalSwitching & Annunciator Panel
2.63” Depth
1.00
” H
eigh
t
2.12” Width
GPS ACCESSORIES
3
Order Toll Free1-800-235-3300Fax: 1-800-828-0623
http://www.edmo.com218
AMPLIFIED GPSSPLITTERS
The GPS NETWORKING ALDCBS1X4 GPS antenna splitter is a one input four output amplified power divider designed spe-cifically for the GPS L1 & L2 carrier frequen-cies. Three of the output legs (J2-J4) are DC-Blocked to prevent antenna damage, they also have 200 ohm DC loads to ground to simulate a GPS antenna pre-amp current draw. The other output leg (J1) is a DC short to power the antenna. All GPS antenna splitters are avail-able with N-type, SMA or TNC connectors.
Options: Network -(N) - This option gives you a splitter that has its own power source & all output ports are DC-blocked. When you designate the Net-work option by putting an “N” at the beginning of the part number you must also designate the antenna voltage to be provided by the splitter power source as well as the source voltage. The antenna voltage is placed immediately after the connector type and then followed by the source voltage. For Example: NLDCBS1X2-N/5/110 is a 1X2 splitter with the “N”etwork option, N-type connectors, a 5VDC antenna voltage & a 110V source. The antenna voltage range is +4 - 15VDC. The Source voltages available are 9-32VDC/110AC/220EuroAC/230UKAC.
Hi-Isolation (HI) - This option gives you a splitter that has high isolation (40db) between
output ports. When you designate the Hi-
Isolation option by putting an “HI” at the beginning of
the part number you will not get full amplification (20+db). The
Hi-Isolation option gives you 3dB gain on a 1X4. Order Example: HILDCBS1X4-N is a 1X4 splitter with the HI-isolation option with N-type connectors.
Applications: Amplified splitters are used in the same ap-plications as our basic splitters, with the added amplification allowing for a longer cable run after the splitter.
Amplified splitters with the Hi-Isolation op-tion are a good option when you are mixing different brands of receivers, older receivers or less expensive receivers. Some GPS receiv-ers leak the local oscillator, their clock signal or reflect the GPS signal due to a less than optimum input VSWR. This causes degradation in performance. This can vary from a slight loss of performance, to the point, that one or more of the receivers no longer operate. The Hi-Isolation option prevents these problems.P/N: ALDCBS1X4
ALDCBS1X2The ALDCBS1X2 GPS Amplified Splitter is a one input, two output device with a 20dB min. gain block.
The frequency response covers the GPS L1, L2 and GLONASS bands with excel-lent gain flatness. In the normal con-figuration, the splitter RF out-put (J1) passes DC from the con-nected GPS receiver through the splitter to the antenna, allowing the GPS receiver to power both the antenna and the splitter amplifier.
The other RF output (J2) is DC loaded with a 200 Ohm resistor to simulate the antenna cur-rent draw.P/N: ALDCBS1X2
NETWORK RE-RADIATING ANTENNA
The PNRRKIT is a Re-radiating system which allows you to re-radiate the GPS L1 carrier indoors. The PNRRKIT consists of a plug-in Re-Radiating amplifier & a Re-Radiating Antenna. It differs from the HNRRKIT in that it does not provide a roof antenna. The PNRRKIT does not provide a DC voltage for a GPS antenna or source. The Re-radiating amplifier has a 110V/220V Plug-in transformer which powers the amplifier. A GPS signal must be provided (from a GPS antenna splitter for example) at the front end of the PNRRKIT, it is then amplified and radiated out the Re-radiating antenna. If the receiving antenna has line of sight with the Re-radiating antenna, it will receive the signal up to 100 feet away. The customer must designate the source voltage(110/220/6-30VDC). For Example: PNRRKIT-N/110 is a Portable Network RRKIT with a 110V source. If the customer wants this amplifier to power an antenna, he must designate the antenna voltage after the connector type. Example: PNRRKIT-N/5/110 is a portable network RRKIT with 5V antenna volt-age and a 110V source voltage. All Re-radiating Kits are available with N-type, SMA or TNC connectors. Note: For Sale to Government and Foreign Customer!
“This device has not been authorized as required by the rules of the Federal Communications Commission. This device is not, and may not be, offered for sale or lease, or sold or leased, until authorization is obtained.”
Mounting Options: WRUMT Universal mount for indoor installation of RRKIT amplifier and antenna
Applications: The HNRRKIT is a necessity if you want to test your GPS receiver indoors with the antenna connected. The HNRRKIT allows you to track GPS while inside a hanger or garage. This al-lows you to work out problems and see failures in GPS systems before they are deployed.
P/N: Description:L1RRKPA-S RE-RADIATING ANTENNAHNRRKIT110 GPS RE-RADIATING KIT/110VWRUMT HNRRKIT AMPLIFIER MOUNT L1GPSA-N L1 ROOF ANTENNA/ACTIVE N CONNL1GPSA-S L1 ROOF ANTENNA/ACTIVERAMB-L1 L1 ROOF ANT MOUNTING BRACKET
GPS RE-RADIATING KIT
The HNRRKIT is a complete re-radiating system to allow you to re-radiate the GPS L1 carrier indoors. The HNRRKIT consists of a Roof Antenna, a plug-in re-radiating amplifier & a re-radiating antenna. The roof antenna is a 38db Gain, 50 ohm antenna. The re-radiating ampli-fier has a 110V/220V Plug-in transformer which powers the amplifier and the roof antenna. The signal from the roof antenna is amplified and radiated out the re-radiating antenna. If the receiving antenna has line of sight with the re-radiating antenna, it will receive the signal up to 100 feet away. All re-radiating Kits are avail-able with N-type, SMA or TNC connectors. The antenna voltage is set at 5VDC. The customer must designate the source voltage(110/220/6-30VDC). For Example: HNRRKIT-N/110 is a Hanger Network RRKIT with a 110V source. Note: For sale to Government and Foreign Customers!
“This device has not been authorized as required by the rules of the Federal Commu-nications Commission. This device is not, and may not be, offered for sale or lease, or sold or leased, until authorization is obtained.”
GPS ACCESSORIES
3
219Order Toll Free1-800-235-3300
Fax: 1-800-828-0623
http://www.edmo.com
Applications: The HNRRKIT is a necessity if you want to test your GPS receiver indoors with the antenna connected. The HNRRKIT allows you to track GPS while inside a hanger or garage. This al-lows you to work out problems and see failures in GPS systems before they are deployed.
P/N: DESCRIPTION:HNRRKIT110 GPS RE-RADIATING KIT, 110 VoltHNRRKIT220 GPS RE-RADIATING KIT, 220 VoltWRUMT Universal Mount For HNRRKITNLDCBS1X4- Network Antenna SplitterNRRKAMP Amplifier, 5V, 110XMRRKIT XM, Sirius Re-Radiating Kit
GPS Notch Filter
Problem: Harmonic Noise Interfering with GPS Systems Solution: TED Manufacturing
4-70 GPS Notch FilterYour global positioning system receives its po-sitional information at 1575.42 megahertz. The communications radios on-board your aircraft typically broadcast in the 121.5 megahertz range. That is a wide separation in frequency bandwidth but it’s not the complete picture. Your comm’s are also producing harmonics which can produce significant noise at the GPS frequency.
Now you can filter that signal and avoid poten-tially hazardous situations.
The TED 4-70 notch filter is a simple low cost way to clean up the receivers frequency environ-ment.
The TED 4-70 notch filter installs quickly and easily via standard BNC bayonet cou-plings, in-line between radios and antenna. The 4-70 rejects in excess of 50dB of 1575.42 signal at the source. Each filter is individually tuned and checked to assure maximum performance. Of course, the 4-70 also passes strenuous environmental criteria so important in aircraft applica-tions.
Major GPS manufacturers recognize this prob-lem and recommend using the 4-70 on new and retrofit installation.
TED Manufacturing has been producing the highest quality components to the most exacting tolerances for the aviation industry for more than 35 years. TED Manufacturing goes beyond the point of simply meeting engineering minimums. At TED, we believe superb quality is fundamen-tal and that exceeding customer expectations is our measure of success.
The GPS notch filter model 4-70 is just one example of how TED Manufacturing can put our experience to work for you to produce your special connector/filtering needs.P/N:4-70-54
SPECIFICATIONS:• Plating-Nickel• Contacts-Nickel, with 30u Gold Plate• Maximum Voltage - 500 Volts• Dielectric Strength - 1500 Volts• Insulation Resistance - 5000 Megohms• Temperature Range-55ºC to +85ºC
Parameter: Typ.: Units:Center Notch Frequency 1575.42 MhzAttenuation over F+1.5 Mhz 52 dBInsertion loss from 118 to 137 Mhz 0.1 dBImpedance from 118 to 137 Mhz 50 OhmsVSWR from 118 to 137 Mhz 1.5:1
Deklin Tech Adapter For GARMIN WAAS Upgrades
As part of existing GNS430 and GNS530 upgrades to WAAS the antenna needs to be changed. The new antenna requires to TNC connector whereas the old an-tenna used a BNC. The choice is either to change the connec-tor or use adapters. Changing the connector is not always practical due to usable cable lengths and/or location. The alternative is using a BNC to TNC adapter, ideally with a right angle. The DBFTMA-90 is just the adapter for the job. It has a high quality precision nickel body construction with a gold plated center conductor. It has a 50 ohm impedance, dielectric withstanding voltage in excess of 1,500V RMS, and a minimum insu-lation resistance of 5k ohm.P/N: DBFTMA-90
SKYBOUND ADAPTER G2
If your GPS equipment uses a data card system for updating the Jeppesen database (usually applies to panel-mounted units), there is now an alternative to the old return-your-card-in-exchange-for-a-new-one routine. Use this USB adapter to update your GPS data card from your computer!
Skybound USB Minimum System Requirements:• Pentium 266MHz or faster CPU• 32 MB RAM minimum• 10 MB free disk space• Microsoft Windows 2000 SP3, or Windows XP SP1• Microsoft Internet Explorer 6.0 or better• Internet Connectivity• Available USB portP/N: DSKYG241
AIRGIZMOS Panel Docks
Garmin 295 GPS Panel Dock
As soon as we announced the availability of our Garmin 196/296 Panel Dock there was a down-pour of requests for a similar product for the popular Garmin 295 handheld GPS. The 295 is somewhat wider than the 196/296 and therefore will not fit in a standard 6.25” radio stack, but we have come up with a flexible mount that can be placed just about anywhere in the panel.
As with the 196/296 Panel Dock, the 295 is held safely and securely, but can be easily removed in a matter of seconds. The external power and antenna connec-tions are made at the back of the unit, and the cables are secured from falling into the panel with special keyholes machined into the dock. P/N: AG-ITEM 2*GPS Unit Not Included
iPOD PANEL DOCKOne creature comfort that I wanted to install in my plane is my iPod. This is really more for my passengers than for myself, but the iPod is a great way to provide hours of entertainment without adding much weight. So, we designed a Panel Dock for it.
The iPod Panel Dock fits all first, second, and third generation iPod devices. It does not fit the iPod Mini, or any of the iPod knockoffs that are out there.
The iPod Dock can be installed to allow access to either the top plugs or the bottom plug. Just flip it the way you want it to go and mount it in your panel. The top plugs are useful for simple headphone-only connections, while the bottom plug allows you to fully inte-grate your iPod into your intercom and power system (a separate cable is required.)P/N: AG-ITEM 3*iPod Not Included
Garmin GPSMap 196/296/396 Panel Dock
The Panel Dock is designed to fit the Garmin GPSMap 196, 296 and 396 handheld GPS units.
The GPS is held firmly in place, but can be easily re-moved by pulling the release tab, located on the left side of the unit. The Panel Dock is designed to fit in a stan-dard 6.25” avionics stack,
GPS ACCESSORIES
3
Order Toll Free1-800-235-3300Fax: 1-800-828-0623
http://www.edmo.com220
but it can also be flush-mounted anywhere else in the panel. We’ve worked hard to make it look like it belongs in a panel. The antenna and power cables slide through prefabricated “key-holes” in the back of the unit, which keeps the connectors from slipping back into the panel when the unit is removed.P/N: AG-ITEM 4*GPS Unit Not Included
AvMap EKP-IV GPSPanel Dock
The guys at AvMap have a really nice GPS. The display is big and bright. It displays terrain in vibrant color. The user interface is second to none. The only problem has been finding a way to mount it in your panel.
Now you can mount the beauti-ful, detailed display of the AvMap EKP-IV directly in your instrument panel using our AvMap EKP-IV Panel Dock. Our Panel Dock is designed to hold the AvMap securely yet it allows you to easily remove your portable from your plane whenever the need arises. The AvMap EKP-IV Panel Dock has all the safety and security features that our other Panel Dock products offer: easy installation, quick release, hassle free management of cables, and el-egance of design.P/N: AG-ITEM 5*GPS Unit Not Included
Lowrance AirMap 1000/2000c
GPS Panel DockWe are happy to introduce a Panel Dock for the Lowrance AirMap 1000/2000c series of portable GPS receivers. This has proved to be a very popular unit because of it’s low price and comprehensive feature set. With the re-cent addition of the terrain module the 2000c is certainly worth considering if you need a color moving map GPS.
We have designed our Panel Dock to fit the AirMap in much the same fashion as our other Panel Dock products. The cables supplied by Lowrance fit through keyhole slots on the back of the unit. The release latch at the top of the Panel Dock permits quick removal of the device for use in another vehicle or simply for security purposes.P/N: AG-ITEM 6*GPS Unit Not Included
AVMAP GEOPILOTPANEL DOCK
This GPS has a nice large screen to go with it’s small size. The Panel Dock is designed to hold the GeoPilot securely in your panel while allowing it to be easily removed for portable use.P/N: AG-ITEM 17
AVMAP GEOPILOT II+ PANEL DOCK
This GPS has a nice large screen to go with it’s small size.
Our Panel Dock™ is designed to hold the GeoPilot securely in your panel while al-lowing it to be easily removed for portable use.P/N: AG-ITEM 25*GPS Unit Not Included
LOWRANCE 600C
PANEL DOCKLowrance makes a low cost handheld GPS that is just the perfect size for many panels. The Panel Dock will allow the AirMap 600c to be nicely mounted in your panel while still allowing it to be easily removed and used as a handheld.P/N: AG-ITEM 16
GARMIN 695/696PANEL DOCK
Did you fall in love with the display of the new Garmin 696? It really is a thing of beauty. As soon as we saw it we immediately made plans to install one of these in our own airplanes. So we set out to design a Panel Dock that solves the unique challenges of such a large device.
First and foremost we were committed to keeping the “footprint” of the Panel Dock to an absolute minimum. The 696 is already 5.7” wide by 7.7” high. So our tradition of adding a latch to the top or side of the Panel Dock had to be changed. We abso-lutely had to stay within the 6.25” width of a standard radio stack, and we really wanted the overall height to be as short as possible. Our solution is a latching
mechanism that is virtually invisible from the front of the dock and does not protrude beyond the overall footprint of 6.25” by 8”.
Next, we needed to provide a way to manage the cables that connect to the 696. As with our other Panel Docks, we have provided keyholes that capture the cables and keep them from falling into the panel. The 696 is installed into the dock by resting the bottom of the GPS on the Panel Dock and attaching the cables. Then the GPS is snapped into the Panel Dock and finally it is latched in place using the latching wheel located on the right side of the dock.
As with our other Panel Dock products, the 695/696 Panel Dock allows you to securely mount your GPS in your panel while allow-ing you to remove the GPS from the plane quickly and easily. The result is a streamlined and professional installation that adds to the functionality of the GPS.P/N: AG-ITEM 29*GPS Unit Not Included
AV80R PANEL DOCKBENDIX KING
Panel Dock for Bendix/King AV80R.• Fits in a standard Avionics Stack.• Comes with 90˚ USB XM Weather Interface Cable.P/N: AG-ITEM 31
Horizontal AngleAdapter
One comment that we’ve heard about the Garmin GPS is that it can be difficult to see if viewing from an angle.
This is especially noticeable when the GPS is mounted on the opposite side of the panel from the pilot. So, we’ve come up with a solution: the Angle Adapter. It angles the GPS at a fixed angle of 15 de-grees, providing a much more convenient view-ing angle. This adapter fits in the same panel cutout as the Panel Dock, so if you already have a Panel Dock you can attach this adapter without having to modify your installation.You can mount the Angle Adapter in either direction, in case you fly in the right seat. In addition, by using this adapter you can expand your instal-lation options, since it lets you surface-mount the Panel Dock on any instrument panel.P/N: AG-ITEM 7
HORIZ TILT ADAPTER 695/696
Many pilots will need to install their GPS on the passenger side of the panel. To make the GPS more readable we offer the Angle Adapter. It works in conjunction with the Panel Dock™
GPS ACCESSORIES
3
221Order Toll Free1-800-235-3300
Fax: 1-800-828-0623
http://www.edmo.com
and provides an additional 15 degrees of angle to the GPS, making it much easier to see and use.
The Angle Adapter fits in the same physical opening as the Panel Dock. The Panel Dock then slides into the Angle Adapter to complete the installation.P/N: AG-ITEM 30
396 VERTICAL TILT ADAPTER
Following up the release of our Horizontal Angle Adapter we decided to address the needs of those pilots who mount their GPS lower on the instrument panel. The Vertical Tilt Adapter angles the viewing angle of the GPS so it is more readable when the GPS is mounted at the bottom of a tall instrument panel.
This adapter fits the same opening as the Panel Dock itself, so adding the vertical tilt should be very easy for exist-ing installations.P/N: AG-ITEM 10
GARMIN 196/296/396/496Panel Dock Cover
Would you like more protection for your Garmin196/296/396/496 Panel Dock? This cover is designed to protect the Panel Dock when the GPS is not installed or when it’s in use. It will protect the portable GPS from the sun’s damaging rays and from the eyes of envious onlookers.P/N: AG-ITEM 14
396/496 XM PREMIUM ANT DOCK
The perfect companion to your new Garmin 396/496 and the AirGizmos Panel Dock. Now you can move the XM antenna from plane to plane, or from vehicle to vehicle, along with the GPS itself.
Designed to mobilize your costly 396/496 XM antenna. It helps to maintain the clean look of a permanenet installation by orga-nizing the antenna cable. Using the AirGizmos An-tenna Dock you can freely move ONE XM antenna from location to location, avoiding high costs of additional equipment and
service subscriptions.
Attach the base to your an-tenna and install the cradle in the necessary location (you can install several cradles in different locations). Using a simple twist & lock mecha-nism (no tools required) the base will lock your antenna into the preinstalled cradle, and your 396/496 XM antenna is ready to go!P/N: AG-ITEM 18
XM ANTENNA DOCK
This Antenna Dock is designed to help freely move an XM an-tenna from location to another to avoid high costs.P/N: AG-ITEM 8
XM ANTENNA CABLEStraight, 2 meter extension for Garmin XM Weather Antenna.P/N: AG-ITEM 9
XM AERO DOCK
The Aero Dock gives you the option of mounting the XM antenna on the outside of the aircraft.P/N: AG-ITEM 12
XM AERO COVER
Permanently mount an exter-nal XM antenna with this new Aero Cover. It fits all major antenna brands.P/N: AG-ITEM 13
RIGHT ANGLE AUDIOCABLE/CA1
The cables supplied by Garmin for the 695/696 all have low-profile, right angle connectors. Garmin does not include an audio cable, and finding one that will fit has been a problem. Until now.
This is a cable that works with the Garmin 695/696. The six foot cable is high quality, shielded, 24 gauge wire with a low-profile, right angle connector on one end, and bare leads on the other end.P/N: AG-ITEM 32
WHATEVERIT TAKES
QUALITY ANDEXCELLENCE
QUALITY ANDEXCELLENCE
For a full description of our Quality Manual,
please visit us atWWW.EDMO.COM
OUR QUALITY MOTTO:
GPS ACCESSORIES
3
Order Toll Free1-800-235-3300Fax: 1-800-828-0623
http://www.edmo.com222